Prekių paieška
- Lėktuvai
- Automobiliai
- Sraigtasparniai
- Multikopteriai
- Laivai
- Tankai
- Aitvarai
- Robotai
- Valdymas/ Stabilizavimas
- Servo mechanizmai
- Elektriniai varikliai
- Greičio reguliatoriai
- Akumuliatoriai/ Pakrovėjai
- Fpv/ Foto/ Video/ Osd
- Vidaus degimo varikliai
- Įrankiai/ Priedai
- Medžiagos
- Dalys lėktuvams
- Dalys automodeliams
- Dalys sraigtasparniams
- Naudotos prekės
/ Robotai / Robotų ratai
Nuorodos
Pololu Wheel 42x19mm Pair
This custom-designed white plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our micro and mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on the hub optionally allow a reflectance sensor to be used for encoder feedback. These wheels are sold in pairs.
This rugged wheel is designed to fit securely on the output shafts of our micro and mini metal gearmotors. These gearmotors should be mounted onto the side of the hub with the protruding teeth, as shown on the right. The output shaft will slide into the socket easily at first but will achieve a snug fit when pressed through to the other edge of the hub.
The output shafts on the Solarbotics metal gear motors will also fit these wheels, but because they are shorter they will have to be mounted onto the other side of the wheel where the fit is tighter (which means the Solarbotics metal gearmotors will not work with the quadrature encoder associated with this wheel). These wheels will also work in this orientation on the Pololu 120:1 mini plastic gearmotor 90-degree 3mm D-shaft output.
Our extended micro metal gearmotor bracket is specifically designed to work with this wheel. Please note that the non-extended version of our mounting bracket (product #989) will not work well with this wheel.
This rugged wheel is designed to fit securely on the output shafts of our micro and mini metal gearmotors. These gearmotors should be mounted onto the side of the hub with the protruding teeth, as shown on the right. The output shaft will slide into the socket easily at first but will achieve a snug fit when pressed through to the other edge of the hub.
The output shafts on the Solarbotics metal gear motors will also fit these wheels, but because they are shorter they will have to be mounted onto the other side of the wheel where the fit is tighter (which means the Solarbotics metal gearmotors will not work with the quadrature encoder associated with this wheel). These wheels will also work in this orientation on the Pololu 120:1 mini plastic gearmotor 90-degree 3mm D-shaft output.
Our extended micro metal gearmotor bracket is specifically designed to work with this wheel. Please note that the non-extended version of our mounting bracket (product #989) will not work well with this wheel.
